Stresstech Temperature Controllers
TZ 600
The Stresstech TZ-600 is a twin zone temperature controller, which can be operated automatically (auto ramping up and down), semi-automatically (manually ramping, hold at temperature), or manually (percentage output, no TC required). Each of the ramping controllers operates independently of each other enabling the operator to begin heating cycles at two different times.
Each zone has a 300 AMP contractor controlled by a 0-2000 degree temperature controller, and a percentage timer to control the rate of rise and cooling, if desired. The 0-300 AMP meter has a selection and polarity switch for use on either zone, straight or reverse polarity. Camlock connectors for power inlet and outlet, as well as type “K” thermoscope jack strips are located on rear of the unit. The unit is very portable at only 29 lbs. and measuring only 15” x 15” x 8”.
LCS 300
The Stresstech LCS 300 controller is a single zone temperature controller that can be operated automatically (auto ramping up and down), semi-automatically (manual ramping, hold at temperature), or manually (percentage output, no TC required). It contains a 300 AMP contractor controlled by a 0-2000 degree to temperature controller, and a percentage timer to control the rate of heating and cooling if desired. The Camlock connectors for the power inlet and outlet, as well as type “K” thermocouple jack strips, are located on the rear of the cabinet. This unit is very popular at only 16 lbs. and measures only 8” x 15” x 15”.
